ELECTRIC 3-WIRE REPAIRABLE REMOTE CONTROL SWITCH W/ BALL CHAIN (DEADMAN CONTROL HANDLE)

ELECTRIC 3-WIRE REPAIRABLE REMOTE CONTROL SWITCH W/ BALL & CHAIN (DEADMAN CONTROL HANDLE)

THIS 3-WIRE ELECTRIC DEADMAN IS DESIGNED SO THAT WHEN THE SWITCH IS MOVED IN ONE DIRECTION BLASTING IS TRIGGERED, IN THE OTHER DIRECTION ONLY BLOW OFF AIR IS TRIGGERED.  BLAST EQUIPMENT WITH AN ABRASIVE CUT-OFF OPTION AND ELECTRIC CONTROLS IS REQUIRED.

PROPER REMOTE CONTROL ATTACHMENT INSTRUCTIONS
ATTACH THE REMOTE CONTROL HANDLE TO THE BLAST HOSE NEAR THE NOZZLE WITH HOSE CLAMPS OR HEAVY WIRE TIES.  FORM A LOOP OF TWINLINE/CONTROL CORD THAT COMES 6" AWAY FROM THE BLAST HOSE, RUNS 6" PARALLEL TO THE BLAST HOSE, AND COMES 6" BACK TO THE BLAST HOSE.  USING DUCT TAPE, ATTACH THE TWINLINE/CONTROL CORD TO THE BLAST HOSE WHERE THE LOOP ENDS BY WRAPPING THE TAPE AROUND THE TWINLINE/CONTROL CORD TWICE AND THEN AROUND THE BLAST HOSE.  THIS CREATES A STRAIN-RELIEF ATTACHMENT AND IS ONLY NECESSARY ON THE FIRST CONNECTION NEAR THE CONTROL HANDLE.  STARTING FROM THE NOZZLE END OF THE BLAST HOSE, ATTACH THE TWINLINE/CONTROL CORD TO THE BLAST HOSE BY WRAPPING DUCT TAPE AROUND BOTH EVERY 3 FEET.