ECOQUIP® 2 EQS WET-ABRASIVE BLASTER, SKID UNIT, 880 LB CAPACITY, PNEUMATIC AND ELECTRIC CONTROL CONNECTIONS

GRACO®

$0.00
(No reviews yet) Write a Review
Part Number:
262960
Description:
ECOQUIP® 2 EQS WET-ABRASIVE BLASTER, SKID UNIT, 880 LB CAPACITY PRESSURE VESSEL, PNEUMATIC AND 12VDC ELECTRIC CONTROL CONNECTIONS, INCLUDES TOOL KIT, 115 GALLON WATER TANK COATED FRAME/ENCLOSURE (MOST POPULAR MODEL)... More info
Adding to cart… The item has been added

ECOQUIP® 2 EQS WET-ABRASIVE BLASTER, SKID UNIT, 880 LB CAPACITY PRESSURE VESSEL, PNEUMATIC AND 12VDC ELECTRIC CONTROL CONNECTIONS, INCLUDES TOOL KIT, 115 GALLON WATER TANK & COATED FRAME/ENCLOSURE (MOST POPULAR MODEL)


This product is compatible with the following OEM manufacturers

OEM ManufacturerPart #
GRACO292960
GRACO262962
GRACO262963

IDS Blast is an authorized distributor of Pirate Brand®, RPB Safety®, Bullard®, Blast-It-All®, Trinco™ & Graco®.
We are not an authorized distributor of the other manufacturers listed above.


ECOQUIP® 2 WET-ABRASIVE BLASTERS COME EQUIPPED TO WORK WITH PNEUMATIC OR 12VDC ELECTRIC CONTROLS.  SEE OPTIONS AREA BELOW TO PURCHASE THE CONTROLS OF YOUR CHOICE.
  • FOR PNEUMATIC CONTROLS, PURCHASE: 888-2263-001PB & 888-4100-50101PB
  • FOR ELECTRIC CONTROLS, PURCHASE: 888-2263-003PB & 17-L-471

Graco® has acquired GeoBlaster and produced a new line of equipment that incorporates the best of the original EcoQuip® line with the best of the GeoBlaster line.

Graco’s EcoQuip 2 EQs vapor blasting equipment is a standalone unit designed to tackle most typical blasting projects. The EQs is built according to tough standards and can be stacked safely in a warehouse.

EQs Features and Benefits:

  • Fits inside a six-foot truck bed for easy transport
  • Stacks easily to save space
  • Max blast pressure of 175 PSI
  • Handles both low and high air flow/pressure applications
  • Painted crash frame
  • 6.5 cubic ft. specialty coated pot

About Vapor Abrasive Blasting

  • Generates less dust - 92% less airborne dust than dry blasting
  • Optimizes air, water and media ratio – resulting in a fine mist with a blast that is powerful, but with less dust
  • Uses less water than traditional water-based wet blasting
  • Designed for years of solid service

VIDEO - EcoQuip® 2 Features & Benefits (Includes Elite Model Features)

 

VIDEO - EcoQuip® 2 Applications

 

VIDEO - EcoQuip® 2 Setup Instructions

 

VIDEO - EcoQuip® 2 Shut Down Instructions

 

VIDEO - EcoQuip® 2 Draining Instructions

 

VIDEO - EcoQuip® 2 Winterize Instructions

 

 Technical Specifications
 Maximum Fluid Working Pressure  175 psi
 Operating Temperature  35° - 110° F
 Recommended Compressor Size  375-900 CFM 
 Blast Hose Size  1-1/4" ID
 Abrasive Capacity*  880 lb.
 Dry Weight  1070 lb.
 Wet Weight*  3120 lb.
 Pressure Pot Volume  6.5 cubic feet
 Water Tank Volume  115 gallon
 * Abrasive capacity and wet weight was found using 80 grit garnet.  Using coarser madia or less dense media will decrease weight
 Air Supply Hose Minimum ID
 185-600 CFM compressor and less than 100ft. hose length  1-1/2" ID
 Over 600 CFM compressor or greater than 100 ft. hose length  2" ID
 Sound Data**
 Sound Pressure Level  133 dB(A)
 Sound Power Level  139 dB(A)
 Instantaneous Sound Pressure Level  131 dB(C)
 ** All readings were taken at the maximum system blast pressure 150 psi (10.3 bar, 1.03 MPa) from the operator position. The abrasive used was garnet and the substrate was steel. Tested in accordance with ISO 9614-2.