1-1/4" PRESSURE REGULATOR KIT FOR SMALL BLASTERS (FACTORY INSTALLED)
888-2003-007PB-FI
PIRATE BRAND®
BLAST POT, PORTABLE, 6.5 CU FT, PRESSURE HOLD SYSTEM, PNEUMATIC, APV II W/TC SLEEVE/AUTO AIR VALVE, 1-1/4" PIPING W/MOISTURE SEPARATOR
PIRATE BRAND®
$6,572.00
(No reviews yet)
Write a Review
Write a Review
PIRATE BRAND®
BLAST POT, PORTABLE, 6.5 CU FT, PRESSURE HOLD SYSTEM, PNEUMATIC, APV II W/TC SLEEVE/AUTO AIR VALVE, 1-1/4" PIPING W/MOISTURE SEPARATOR
- Part Number:
- 888-0531-33701PB
- Bulk Pricing:
-
- Buy 2 or above and pay only $6,067.00 each
- Description:
- ABRASIVE BLAST POT / SANDBLASTING MACHINE, PORTABLE, 6.5 CU. FT. (185 LITERS), 150 PSI (10.3 BAR), PRESSURE HOLD SYSTEM, PNEUMATIC, INCL: APV II W/TC SLEEVE/AUTO AIR VALVE, 1-1/4" PIPING W/MOISTURE SEPARATOR, 55' TWINLINE ASSY CONTROL HANDLE #2 (5 Y... More info
55' ABRASIVE CUTOFF KIT, PNEUMATIC, PER OUTLET, (FACTORY INSTALLED) (CONTROL HANDLE NOT INCLUDED)
888-2035-000PB
PIRATE BRAND®
PALM BUTTON ABRASIVE CUTOFF KIT, PNEUMATIC, PER OUTLET (FACTORY INSTALLED)
888-2035-002PB
PIRATE BRAND®
RELIEVING SAFETY VALVE POP OFF KIT, S-SERIES BLASTERS, 3.5 6.5 E-SERIES, K-SERIES BLASTERS
888-2470-00702PB
PIRATE BRAND®
ABRASIVE UMBRELLA KIT, SET-IN, 24", ADJUSTABLE HEIGHT, FOR 24" DIAMETER VESSELS, POWDER COATED
888-7001-00424PB
PIRATE BRAND®
ONE OUTLET TIMER CONTROL BOX W/ KEY RESET MOUNTING BRACKET FOR SINGLE OUTLET BLASTERS
PB-9805023P-01
PIRATE BRAND®
ABRASIVE BLAST POT / SANDBLASTING MACHINE, PORTABLE, 6.5 CU. FT. (185 LITERS), 150 PSI (10.3 BAR), PRESSURE HOLD SYSTEM, PNEUMATIC, INCL: APV II W/TC SLEEVE/AUTO AIR VALVE, 1-1/4" PIPING W/MOISTURE SEPARATOR, 55' TWINLINE ASSY & CONTROL HANDLE #2 (5 YEAR / 10 YEAR WARRANTY*)
This product is compatible with the following OEM manufacturers
IDS Blast is an authorized distributor of Pirate Brand®, RPB Safety®, Bullard®, Blast-It-All®, Trinco™ & Graco®.
We are not an authorized distributor of the other manufacturers listed above.
FEATURES & BENEFITS OF SPH APVII PNEUMATIC
A. 6.5 CU. FT. CAPACITY (185 LITERS)
1. 150 PSI VESSEL (10.3 BAR)
2. A.S.M.E. SECTION VIII DIVISION 1
3. C.R.N. FOR ALL PROVINCES
B. PRESSURE HOLD SYSTEM
1. REDUCES ABRASIVE CONSUMPTION
2. REDUCES MOISTURE PROBLEMS
3. SMOOTHER STARTS & STOPS
C. HEAVY DUTY MOISTURE SEPARATOR
D. 1-1/4" GALVANIZED PIPING FOR CORROSION RESISTANCE
E. HEAVY DUTY FULL PORT BALL VALVES
F. EXTENDED LIFE SCHEDULE 80 HEAVY DUTY NIPPLE
1. WITHSTANDS ABRASIVE WEAR FOR LONGER LIFE
G. BOLT CLAMPS ON PUSHER LINE MAKE FIELD REPAIRS EASIER
H. NORMALLY CLOSED VALVES
1. AUTOMATIC PLUNGER VALVE II (APVII) PREMIUM ABRASIVE METERING VALVE WITH QUADRUPLE PLUNGER SEAL ARRANGEMENT SOLVES THE AIR & ABRASIVE CARRY OVER PROBLEM AS WELL AS THE PLUNGER & SEAL JAMMING PROBLEM NORMALLY ASSOCIATED WITH REGULATED LOW PRESSURE BLASTING APPLICATIONS AND OR THE USE OF STEEL ABRASIVE. SOLID MACHINED TUNGSTEN CARBIDE PLUNGER & SLEEVE PROVIDES FAR SUPERIOR WEAR RATES AND 100% CONSISTENT TOLERANCES. 1" NPT CLEANOUT PORT GIVES ACCESS TO OBSTRUCTIONS THAT MAY BE BRIDGING OVER THE METERING PORT ALSO ALLOWS YOU TO DRAIN THE VESSEL WITHOUT REMOVING THE VALVE.
2. AUTO AIR VALVE FOR FAST STARTS & STOPS
3. HEAVY DUTY FILTERED CONTROL VALVE REDUCES STOPPING TIME WHEN CONTROL HANDLE IS RELEASED
4. RELIEVING CONTROL HANDLE REDUCES AIR CONSUMPTION AND REDUCES STOPPING TIMES WHEN CONTROL HANDLE IS RELEASED
I. BLOW DOWN MUFFLER REDUCES UNNECESSARY LOUD NOISE
A. 6.5 CU. FT. CAPACITY (185 LITERS)
1. 150 PSI VESSEL (10.3 BAR)
2. A.S.M.E. SECTION VIII DIVISION 1
3. C.R.N. FOR ALL PROVINCES
B. PRESSURE HOLD SYSTEM
1. REDUCES ABRASIVE CONSUMPTION
2. REDUCES MOISTURE PROBLEMS
3. SMOOTHER STARTS & STOPS
C. HEAVY DUTY MOISTURE SEPARATOR
D. 1-1/4" GALVANIZED PIPING FOR CORROSION RESISTANCE
E. HEAVY DUTY FULL PORT BALL VALVES
F. EXTENDED LIFE SCHEDULE 80 HEAVY DUTY NIPPLE
1. WITHSTANDS ABRASIVE WEAR FOR LONGER LIFE
G. BOLT CLAMPS ON PUSHER LINE MAKE FIELD REPAIRS EASIER
H. NORMALLY CLOSED VALVES
1. AUTOMATIC PLUNGER VALVE II (APVII) PREMIUM ABRASIVE METERING VALVE WITH QUADRUPLE PLUNGER SEAL ARRANGEMENT SOLVES THE AIR & ABRASIVE CARRY OVER PROBLEM AS WELL AS THE PLUNGER & SEAL JAMMING PROBLEM NORMALLY ASSOCIATED WITH REGULATED LOW PRESSURE BLASTING APPLICATIONS AND OR THE USE OF STEEL ABRASIVE. SOLID MACHINED TUNGSTEN CARBIDE PLUNGER & SLEEVE PROVIDES FAR SUPERIOR WEAR RATES AND 100% CONSISTENT TOLERANCES. 1" NPT CLEANOUT PORT GIVES ACCESS TO OBSTRUCTIONS THAT MAY BE BRIDGING OVER THE METERING PORT ALSO ALLOWS YOU TO DRAIN THE VESSEL WITHOUT REMOVING THE VALVE.
2. AUTO AIR VALVE FOR FAST STARTS & STOPS
3. HEAVY DUTY FILTERED CONTROL VALVE REDUCES STOPPING TIME WHEN CONTROL HANDLE IS RELEASED
4. RELIEVING CONTROL HANDLE REDUCES AIR CONSUMPTION AND REDUCES STOPPING TIMES WHEN CONTROL HANDLE IS RELEASED
I. BLOW DOWN MUFFLER REDUCES UNNECESSARY LOUD NOISE