BLAST-IT-ALL® 60V SUCTION CUBE BLAST CABINET

BLAST-IT-ALL® 60V SUCTION CUBE BLAST CABINET, 60" WIDE x 60" DEEP x 53" HIGH, ALUMINUM PISTOL GRIP MEDIA BLAST GUN WITH 5/16" BORE CERAMIC NOZZLE

AVAILABLE MODELS (THREE (3) PHASE - SPECIFY VOLTAGE)

• 900 CFM RECLAIM WITH D-20 DUST COLLECTOR - BIA 60V-2
• 900 CFM RECLAIM WITH M4 DUST COLLECTOR - BIA 60V-M4
• 900 CFM RECLAIM WITH RPJ2 DUST COLLECTOR WITH DRAWER - BIA 60V-3
• 900 CFM RECLAIM WITH RPJ2 DUST COLLECTOR WITH HOPPER - BIA 60V-4
• 1200 CFM RECLAIM WITH M6 DUST COLLECTOR - BIA 60V-M6
• 1200 CFM RECLAIM WITH RPJ2 DUST COLLECTOR WITH DRAWER - BIA 60V-5
• 1200 CFM RECLAIM WITH RPJ2 DUST COLLECTOR WITH HOPPER - BIA 60V-5-1
• 1200 CFM RECLAIM WITH RPJ2 DUST COLLECTOR WITH HOPPER - BIA 60V-6

FEATURES

• VENTURI SYSTEM:
  A lightweight, aluminum, pistol grip design, suction feed, gun is supplied. A No. 5 air orifice and No. 5 ceramic nozzle are installed as standard, other orifice and nozzle sizes are available depending upon compressed air supply. Carbide nozzles are also available. Media/Air blast ratio is obtained by a fixed media feed valve.
• OPERATION:
  The BLAST-IT-ALL® Cube is designed and equipped to effectively blast large items with a variety of blasting media. High static fans available for heavy media. The operator accesses the blast area from outside the Cube through glove ports to direct blast pattern at the items. Blast pattern may be from a venturi suction gun or pressure blast.
• CABINET:
  Constructed of high quality reinforced steel.
• WORK SURFACE:
  Heavy duty removable grate of 9 gauge, flattened, expanded metal.
• DOOR:
  One, full opening, double walled, swing type. Full perimeter gasket with knife edge sealing. Self adjusting door latches.
• GLOVES:
  Full length, cloth lined, abrasive and static resistant. Screw clamp mounted, for easy replacement, to a 10" elongated, padded port.
• WINDOW:
  Large, 12-1/2" x 21", tempered glass provides long life and minimized static build up of dust.
• LIGHT:
  One, 4 tube 48" flourescent fixture, shielded, and externally located on top of the machine.   CONTROLS: Dual on/off switches for blower and lights. Safety Door Switch allows blasting only when the door is closed. Blast is controlled by a foot activated control.
• BLOW-OFF NOZZLE:
  A fingertip controlled air blow-off nozzle allows cleaning of the work inside the cabinet.
• HOSES:
  All air and media hoses are lightweight, flexible, and abrasive resistant. Flex hose is abrasive and static resistant.
• ELECTRICAL:
  A 230/460 Volt, 60 Hz, 3 Phase, service is required. Alternate voltages are available. NOTE: Specify voltage on purchase order.
• PAINT:
  A durable corrosion resistant enamel, grey in color, is used internally and externally.

AVAILABLE ACCESSORIES

• Set-In Turntable
• Turntable & Track Assemblies
• Powered Turntable
• Additional Full Size Door
• Vertical Doors
• Power Operated Vertical Door
• 3' x 3' Service Door
• Wear Kit - Reclaim Wear Plate, Tungsten Carbide Nozzle, Rubber Curtains (Sides & Back)