BULLARD, BCX COMMUNICATION SYSTEM, SILICONE COVER, BLACK

BULLARD, BCX COMMUNICATION SYSTEM, SILICONE COVER, BLACK

This product is compatible with the following OEM manufacturers

IDS Blast is an authorized distributor of Pirate Brand®, RPB Safety®, Bullard®, Blast-It-All®, Trinco™ & Graco®.
We are not an authorized distributor of the other manufacturers listed above.

HOW TO PUT TOGETHER A BCX RADIO COMMUNICATION SYSTEM

Each person wanting to communicate will need the following:

1. COMBTMD radio

2. One of the following headsets:

   1. HEADSETSTD1 – Standard Boom Mic Headset

   2. HEADSETBMR – Bone Mic Headset – Right Ear

   3. HEADSETBML – Bone Mic Headset – Left Ear

   4. HEADSETMUFF – Headset that clips into hard hat

! Standard Boom Mic Headset or Bone Mick Headsets can be worn with respirators

A Push-To-Talk switch (PTTSWITCH)  is also recommended but not required for each user.  Without the Push-To-Talk switch, all mics are active all the time.

LONE WORKER PROTECTION (LWP) MAN DOWN SAFETY PACK

The BCX radios are equipped with a motion sensor for detecting the immobility of the wearer. By software configuration (see Software Configuration), for each in Talk mode, it is possible to activate the LWP feature. With this function activated, the device sends a voice message to all other radios of the kit (Talk, Listen or Multiplex) indicating the immobility of the wearer.

 Here’s how it works:

If no motion is detected during the pre-alert period: a warning beep sounds in the audio equipment of the wearer to report its immobility and encourage him to move to cancel the alarm, but no alert is sent at this stage.

 Following this pre-alert, if motion is still not detected during the alert period, a voice message is sent to all radios in the kit. This message indicates the rank of the radio in the kit (1, 2 or 3) and an intermittent audio signal is played in the audio device of the wearer to indicate that an alert is sent.

 EXAMPLE: The user with radio #2 in the kit does not move. After 30 seconds (pre-alert period), a signal sounds at the audio device. 5 seconds later (alert period), if the user still has not moved, the radio sends a vocal alert to the other radios that will broadcast APPI Com 2 immobile.

 NOTE: The LWP function is active only if the radio of the user is in communication with at least one other radio.