Used ABS 12-Nozzle Pass-Through Suction Blast Machine
Originally sold new by IDS Blast in 2016 for approximately $143,000, this Abrasive Blast Systems (ABS) 12-nozzle pass-through suction blast machine is designed for continuous production blasting with an automated pass-through conveyor system. The machine was operating before being replaced with another machine and professionally disassembled for removal from the customer's facility. It features an integrated abrasive reclaim and recycling system with screen deck separator, reverse-pulse dust collector, automatic blow-off station, and adjustable blasting controls, making it well suited for a wide range of production cleaning and surface preparation applications.
Key Features
- 12-nozzle suction blast cabinet
- 3/8-inch blast nozzles with 3/16-inch air jets
- Pass-through conveyor belt and mesh chain design for continuous production
- Adjustable conveyor and rotary head speeds
- Adjustable blasting pressure from 20 to 80 PSI
- Integrated abrasive reclaim and recycling system with screen deck separator
- Rubber-lined 1,600 CFM cyclone
- 1 cu. ft. abrasive storage hopper
- Four triple-outlet suction feed valves
- Automatic blow-off station
- Horizontal reverse-pulse cartridge dust collector
- Automatic reverse-pulse filter cleaning
- Front and rear cabinet access doors
- Integrated control panel with automatic operating controls
- Heavy-duty industrial construction by Abrasive Blast Systems (ABS)
Specifications
General Information
- Manufacturer: Abrasive Blast Systems (ABS)
- Year: 2016
- Job Number: 3U1201
Dimensions
- Overall Dimensions: Approx. 290" L × 148" W × 192" H
- Blast Cabinet: 52" × 52" × 48" H
- Cabinet/Reclaimer Assembly: 106" × 88" × 188" H
- Dust Collector: 48" × 84" × 120" H
Blast System
- Blast Guns: 12 Suction Guns
- Nozzle Size: 3/8 in.
- Air Jet Size: 3/16 in.
- Operating Pressure: 20-80 PSI
- Abrasive Type: Plastic Media
Abrasive Reclaim System
- Cyclone Capacity: 1,600 CFM
- Abrasive Hopper: 1 Cu. Ft.
- Feed Valves: Four Triple-Outlet Suction Feed Valves
Dust Collection
- Dust Collector Type: Horizontal Reverse-Pulse Cartridge Dust Collector
- Dust Collector Capacity: 1,600 CFM
- Filter Cleaning: Automatic Reverse-Pulse
- Exhaust Motor: 7.5 HP, 3,450 RPM
Utilities
- Compressed Air Requirement: Approx. 700 CFM @ 80 PSI
- Air Supply Connection: 2-1/2 in. NPT
- Electrical: 480V, 3-Phase, 60 Hz
Condition
This machine was operating before being replaced with another machine at the previous owner's facility. It has since been professionally disassembled and transported. As with any used industrial equipment, the buyer should expect to inspect, install, reconnect utilities, and commission the system before placing it into production.
Inspection prior to purchase is welcomed and encouraged.
Sale Terms
This equipment is sold as-is, where-is, with no warranties expressed or implied. Buyer is responsible for rigging, freight, installation, electrical and compressed air connections, startup, and commissioning unless otherwise agreed.
Originally purchased new for approximately $143,000, this system provides an excellent opportunity to add automated production blasting capacity at a fraction of the cost of new equipment.