REGENERATIVE (HEATLESS) AIR DRYER, 75 CFM @ 100 PSI, 85 CFM @ 120 PSI, 120-1-60 VOLTAGE, 1" IN/OUT
Compressed air enters the dryer and is directed to a tower by the inlet valves. It then proceeds up through the tower, gives up its moisture, and then exits through the outlet check valve. A portion of the dry air, called purge is metered and expanded to atmospheric pressure through an orifice assembly.
The purge air enters the regeneration tower through the purge check valve, the purge air then utilizes a result of the adsorption process called, heat of adsorption to facilitate regeneration of the desiccant. The moisture is picked up by the purge air, and exits to the atmosphere through the purge exhaust valve and muffler.
The drying and regenerating cycles occur simultaneously for 5 minutes. Just prior to the end of the 5 minute cycle the purge valve closes and the regeneration tower repressurizes before the inlet valves invert and the process starts again.
Dryer Features
- NEMA 4 Electrical
- OSHA Approved Mufflers
- Illuminated On/Off Power Switch
- ASME/CRN Vessels 75 SCFM & Up
- ASME Relief Valves
- Control Air Filter
- Control Air Filter
- Adjustable Purge Flow w/ Indicator
Product Specifications
| Type Name | Heatless Dryer |
| CFM @ 120 PSI: | 85 |
| CFM @ 100 PSI: | 75 |
| Voltage | 120-1-60 |
| In/Out NPT | 1" |
| Max Pressure | 150 PSIG |
| Shipping Wt | 509 |
| Dessicant Weight | 75 |
| Recommeded Pre Filter | SPT-041GA-H |
| Recommeded After Filter | SPT-041GM-P |