2824 LITTLE-BLASTER™ SERIES SUCTION BLAST CABINET, WITH 100 CFM DUST COLLECTOR (MODEL: LB2824)

2824 LITTLE-BLASTER™ SERIES SUCTION BLAST CABINET, TABLE-TOP MODEL, 28" x 24", ALUMINUM PISTOL GRIP MEDIA BLAST GUN, WITH 100 CFM DUST COLLECTOR (MODEL: LB2824)

The LITTLE-BLASTER equipment was designed for the hobbyist or very light production use. The LITTLE-BLASTER is constructed from heavy gauge metal, which is continuously welded. Also incorporated into the line are several products from the BLAST-IT-ALL production blasting equipment, proven reliability such as the blast gun. The LITTLE-BLASTER is also designed for a small company to start blasting with only a dust collector; then, without a lot of expense enables that user to convert to a reclamation system with the LITTLE-BLASTER Reclaimer Kit.

Unfortunately, the LITTLE-BLASTER is limited to specifically smaller sizes than production type equipment, but it is considered the highest caliber blaster manufactured today.

• Dust Collector: 100 CFM cartridge type collector for better dust control providing cleaner working chamber.
• Light Box: Two (2) tube 24: fluorescent light, for best possible lighting in blast chamber, On-Off control switch for light and cartridge dust collector.
• Viewing Window: Large 12"X20" tempered glass provides long life and minimizes static build up of dust.
• Door Latch: Heavy-duty cam type, adjustable for positive door seal.
• Glove Arm Hole: Heavy duty cloth lined vinyl snap-in gloves are quick changing.
• Air Flow Regulator and Gauge: Allows adjustable air pressure to gun for proper media flow to provide finish desired.
• Clean out door: Easy access to filter screen, trapping heavy particles form abrasives. Allows recovery of small parts that may fall from blast chamber.
• Safety Foot Control: Prevents accidental blast operation.
• Doors: Large double walled doors (both sides). Knife sealing edge assures positive seal in blast chamber.
• Shaker Handle: Handle for shaking dust from cartridge.
• Cartridge: 8 1/2" x 9 1/2" cartridge with 175 2" pleats.
• Dust Sump: Allows dust to flow directly into waste container.
• Media Hose: 1/2" media hose, from media valve to bottom fitting on blast gun.
• Media Valve: Universal Feed allowing all types of abrasives to be used. 2" plug outlet for easy clean-out.
• Motor: 120 volt, 15 amp switch control.
• Compressed Air Inlet: 1/2" coupler for easy installation of optional moisture trap.

Media Blast Gun:
Lightweight aluminum pistol grip for long life. Interchangeable air jets and nozzles for various air supplies and media flow.
1/8" air jet supplied as standard. 5/32" - 3/16" air jets with sized nozzles supplied upon request.