4824 LITTLE-BLASTER™ SERIES SUCTION BLAST CABINET, W/ 400 CFM RECLAIMER D10-400 DUST COLLECTOR

4824 LITTLE-BLASTER™ SERIES SUCTION BLAST CABINET, 48" x 24", ALUMINUM PISTOL GRIP MEDIA BLAST GUN, WITH 400 CFM RECLAIMER & D10-400 DUST COLLECTOR (MODEL: LB4824-400DC)

The LITTLE-BLASTER equipment was designed for the hobbyist or very light production use. The LITTLE-BLASTER is constructed from heavy gauge metal, which is continuously welded. Also incorporated into the line are several products from the BLAST-IT-ALL production blasting equipment, proven reliability such as the blast gun. The LITTLE-BLASTER is also designed for a small company to start blasting with only a dust collector; then, without a lot of expense enables that user to convert to a reclamation system with the LITTLE-BLASTER Reclaimer Kit.

Unfortunately, the LITTLE-BLASTER is limited to specifically smaller sizes than production type equipment, but it is considered the highest caliber blaster manufactured today.

• RECLAIMER: High performance 400 CFM cyclone reclaim separates good media from dust and by-products.
• LIGHT BOX: Two (2) tube 24" fluorescent light, for the best possible lighting in the blast chamber. ON-OFF control switch for light and reclaimer.
• VIEWING WINDOW: Large 12" x 20" tempered glass provides long life and minimizes static build-up of dust.
• DOOR LATCH: Heavy duty cam type, adjustable for positive door seal.
• GLOVE ARM HOLE: Snap-In heavy duty cloth lined vinyl gloves allowing easy access of handling parts in blast chamber.
• AIR REGULATOR AND GAUGE: Allows adjustable air pressure to gun for proper media flow to provide finish desired.
• CLEAN OUT DOOR: Allows recovery of small parts that may fall from blast chamber.
• SAFETY FOOT CONTROL: Prevents accidental blast operation.
• DOORS: Large double walled doors (both sides) for opening size see Figure"C". Knife sealing edge assures positive seal in blast chamber.
• MOTOR: 1/2 HP, 120 volts, 11 amp, 3450 rpm, switch controlled.
• DUST COLLECTOR: Twenty-five tubular cotton sateen dust bags, with slide gate hopper, fan rated at 400 CFM.
• FILL DOOR: To add media to machine and remove debris from debris screen basket inside reclaimer, adjustable air intake on door.
• SUMP HOSE: 4" flexible duct hose from machine sump outlet to reclaimer inlet.
• MEDIA VALVE: Universal feed allowing all types of abrasives to be used. 2" drain plug outlet for easy clean-out.
• MEDIA HOSE: 1/2" media line hose from reclaimer media valve to bottom fitting on blast gun.
• COMPRESSED AIR INLET: 1/2" coupler for easy installation of optional moisture trap.
• MYLAR DISPENSER: Window Protector.

Media Blast Gun:
Lightweight aluminum pistol grip for long life. Interchangeable air jets and nozzles for various air supplies and media flow.
1/8" air jet supplied as standard. 5/32" to 3/16" air jets with sized nozzles supplied upon request.