2824 LITTLE-BLASTER™ SERIES SUCTION BLAST CABINET, WITH RECLAIMER DUST BAG (MODEL: LB2824-300DB)

2824 LITTLE-BLASTER™ SERIES SUCTION BLAST CABINET, TABLE-TOP MODEL, 28" x 24", ALUMINUM PISTOL GRIP MEDIA BLAST GUN, WITH RECLAIMER & DUST BAG (MODEL: LB2824-300DB)

The LITTLE-BLASTER equipment was designed for the hobbyist or very light production use. The LITTLE-BLASTER is constructed from heavy gauge metal, which is continuously welded. Also incorporated into the line are several products from the BLAST-IT-ALL production blasting equipment, proven reliability such as the blast gun. The LITTLE-BLASTER is also designed for a small company to start blasting with only a dust collector; then, without a lot of expense enables that user to convert to a reclamation system with the LITTLE-BLASTER Reclaimer Kit.

Unfortunately, the LITTLE-BLASTER is limited to specifically smaller sizes than production type equipment, but it is considered the highest caliber blaster manufactured today.

• Reclaimer: High performance 300 CFM cyclone type reclaimer.
• Light Box: Two (2) tube 24" fluorescent light, for best possible lighting in blast chamber, On-Off control switch for light and reclaimer.
• Viewing Window: Large 12"X20" tempered glass provides long life and minimizes static build up of dust.
• Door Latch: Heavy-duty cam type, adjustable for positive door seal.
• Glove Arm Hole: Heavy duty cloth lined vinyl snap-in gloves are quick changing.
• Air Flow Regulator and Gauge: Allows adjustable air pressure to gun for proper media flow to provide finish desired.
• Clean out door: Easy access to filter screen, trapping heavy particles form abrasives. Allows recovery of small parts that may fall from blast chamber.
• Safety Foot Control: Prevents accidental blast operation.
• Doors: Large double walled doors (both sides). Knife sealing edge assures positive seal in blast chamber.
• Motor: 1/2 HP, 120 volts, 11 amp, 3450 rpm switch controlled.
• Dust Collector: Cotton sateen dust bag collects dust from reclaimer.  Zipper in bottom for emptying dust and debris.
• Fill Door: To add media to machine and remove debris from debris screen basket inside reclaimer, adjustable air intake on door.
• Sump Hose: 4" flexable duct hose, from machine sump outlet to reclaimer inlet.
• Media Valve: Universal Feed allowing all types of abrasives to be used. 2" plug outlet for easy clean-out.
• Media Hose: 1/2" media line hose from reclaimer media valve to bottom fitting on blast gun.
• Compressed Air Inlet: 1/2" coupler for easy installation of optional moisture trap.

Media Blast Gun:
Lightweight aluminum pistol grip for long life. Interchangeable air jets and nozzles for various air supplies and media flow.
1/8" air jet supplied as standard. 5/32" - 3/16" air jets with sized nozzles supplied upon request.